Complete measuring set, 100 N, with TS

Complete force or weight measuring kit, 100N, 10kg, 20lb, complete with:

– 1 x 100 N load cell TS type
– 1 x LAB.PROBE conditioner
– 7 in touch screen display
– Power supply and communication cable for the PROBE
– Testloop Probe software licence, pre-installed and configured
– DB9M connector soldered on the load cell with its case
– 1 x M12 ball joint
– 1 x M12 eye bolt
– 1 x M12 hex screww 50 mm long
– 4 x M12 nuts
– 4 x M12 washers

The LAB.PROBE.SGC is used to digitize the signal which provides an incredible 250 000 : 1 signal resolution. Combined with the touch screen display loaded with the TLP (Testloop Probe) software, all settings are readily and easily availables, including scaling and calibration. There are no mysterious ways here. You can continuously visualize the actual values and the max and min are also updated in real time. A recording can be launched and stopped and then saved for analysis in a convenient CSV format. A snapshot button is always available in order to freeze a value.

*Note: The first 3 items cannot be set to zero. The TLP software is always available for downloads and an .msi version is available to run on your Windows computer if desired.

Force or load in N	100 N
Force or load in lb	22.5 lb
Force or load in kg	10 kg

TS type Sensor, 100 N, 20lb, 10kg

Force or load in N	100 N
Force or load in lb	22.5 lb
Force or load in kg	10 kg

Calibration force tension, 10N to 100N

Force or load in N	10 N, 20 N, 50 N, 100 N
Force or load in lb	2.25 lb, 4.5 lb, 11.25 lb, 22.5 lb
Force or load in kg	1 kg, 2 kg, 5 kg, 10 kg

Calibration force compression, 10N to 100N

Force or load in N	10 N, 20 N, 50 N, 100 N
Force or load in lb	2.25 lb, 4.5 lb, 11.25 lb, 22.5 lb
Force or load in kg	1 kg, 2 kg, 5 kg, 10 kg

Product :